Call Us: 775-826-6222

DRE15W94256 E-POWER LED Emergency Battery Backup Driver Kit 15W w Constant Current

DRE15W94256 E-POWER LED Emergency Battery Backup Driver Kit 15W w Constant Current

EGT/Bulb Daddy
$105.84 ea

Brand: EGT/Bulb Daddy
 MPN: DRE15W94256
 Wattage: 15W
AC Input Voltage: 120 ~ 277V
DC Output Voltage: 20 ~ 50VDC
Recharge Time: 24 hrs
Discharge Time: ≥1.5 hrs

         

$105.85

SKU: DRE15W94256

Description

DRE15W94256
E-Power15 • Emergency LED Driver Battery Backup Kit 15W Constant Power (Internal)

  • E-Power15 is designed to work in parallel with an existing LED driver allowing same fixture to be used as both normal and/or emergency light
  • Automatically senses power failures and switches to emergency mode, engaging battery and providing power to LED fixture
  • Keeps connected LEDs illuminated at a reduced lumen output for 90 minutes or until power is restored
  • Modular design – LED driver/charger as one unit, battery as a separate unit
  • Allows for flexible arrangement of individual components – inside fixture, outside fixture, or in wire ways
  • High temperature and maintenance-free Lithium-ion battery ensures long life 
  • Low output voltage at 20 to 50VDC
  • Delivers up to 15 watts maximum power in emergency mode
  • Built-in short-circuit, over temperature, battery overcharge and over-discharge protections
  • Self-diagnostic circuit performs periodic tests automatically

Additional information

Weight 1.2 lbs
Dimensions 8.25 × 3.5 × 1.25 in
Brand

Technical Specifications

 

Technical Specifications
Input Voltage: 120 ~ 277V  Battery: Li-ion
Output Voltage: 20 ~ 50VDC Recharge Time: 24 hrs
Emergency Power: 15W Max Discharge Time: ≥1.5 hrs
Input Frequency: 50 / 60 Hz Operation: Automatic
Operating Temperature: 32° ~ 122°F (0° ~ 50°C) Recharging System: Internal
Test: Automatic Surge Protection: Line-Neutral 3kV
Dimensions: Driver: 7.32″ x 1.5″ x 1.0″
Battery: 7.03″ x 1.61″ x 1.0″		 Classifications & Certifications: UL/cUL Listed; CSA; RoHS
Weight: 1.50 lbs Warranty: 5 Year Limited
Miscellaneous:
Suitable for use in damp locations
Emergency driver must be fed from the same branch circuit as the LED driver
Verify that Luminaire LED lamp(s) have an operation voltage between 20VDC and 50VDC
Verify that Luminaire LED lamp(s) have a power rating equal to, or greater than, the emergency power rating of the driver model under consideration

Downloads

 

DRE15W94256 – Technical Specification Sheet Upload Date: 01/19/2022
DRE15W94256 – Installation Instructions Upload Date: 01/06/2021

CONNECT WITH US